GE Fanuc IC670ALG240-KC 16PT Analog Input Module

GE Fanuc IC670ALG240-KC 16PT Input Module

New product in manufacturer's box

Brand: Ge Fanuc

Model: IC670ALG240-KC

The IC670ALG240 is an analog input module from GE Fanuc. This module is specifically part of the Field I/O control series which is designed for installation alongside a Bus Interface Unit (BIU) and an expansion rack. This module provides sixteen (16) analog input channels in a single group, accepting current input signals in the form of 0-20 mA and 4-20 mA and can be operated in an input signal range of 0-25 mA.

The IC670ALG240 can be used to interface field transmitters such as Pressure, Level, Flow, Temperature, Turbidity, and similar types. It can also be used to interface output signals from panel meters, data loggers, single-loop controllers, variable frequency drives (VFDs), signal splitters, signal isolators, and other devices. This module comes with a built-in Analog to Digital Converter (ADC) available for each input channel that converts analog data to digital format with 16-bit resolution.

The IC670ALG240 has a maximum current draw of 251 mA from the BIU power supply. It has an operating temperature range of 0-55 degrees Celsius and requires a current loop power supply of 20-28 VDC, rated with 10% ripple voltage. It has a temperature coefficient of +/-.002% of value per degree C, typical, and +/-.005% of value per degree C, maximum. This module supports 2-wire ANSI Type 2 transmitter and 3-wire Type 3 transmitter wiring configuration.

The IC670ALG240 is capable of performing internal diagnostics such as uncalibrated module, calibration data out of range, failed calibration write, ready to calibrate, invalid command, incomplete A/D conversion, factory calibration not available, individual channel high and low alarm, underrange, and overrange conditions.

The GE IC670ALG240 input module is a 16-channel analog current input module. At the same time, the module is able to receive 16 loop inputs using a common power supply. The module is capable of accepting 2-wire or 3-wire current transmissions and then changing them to digital input values. The input current for the module ranges between 0 and 25 milliamperes. The module supports word and bit data types. The IC670ALG240 input module can be easily calibrated, and the calibration data can be stored in flash memory. The module uses 50 Hertz and 60 Hertz frequencies for data acquisition. The module is intelligent and comes with diagnostics and alarm features that can report overrange and open wire alarms. The module's alarms can be configured by operators.

The GE Fanuc IC670ALG240 input module has a 16-bit resolution. The input current range for 16 bits ranges between 0 and 25 milliamperes. The module's current loop power is between 20 and 28 Volts, and it has a maximum ripple of 10%. For operation, the temperature must be set between 0 and 55 degrees Celsius. The IC670ALG240 input module uses a 2nd order active RC filter as a hardware filter. The common-mode rejection from channel to ground is 86 dB. The input module has several useful features. It comes with an Active Channel mode which helps set a specific channel as active or inactive. It has advanced filtering options such as input filter, line filter, and average filter.

 Technical Specifications for IC670ALG240

Brand GE Fanuc

Series Field Control

Manufacturer GE Fanuc

Part Number IC670ALG240

Part Number IC670ALG240

Description Analog Input Module

Product Description Analog Current/Voltage Source Input Module

Channels 16

No. of channels Eight (8)

Input Current 0-25 milliamperes

Wiring Configuration Single

Frequency 50/60 hertz

Input Signal, nominal 0-20 mA

Resolution 16 bits

Input Signal, range 0.0-20.48 mA

Ripple 10% max.

Maximum Input Current 35 mA

Common Mode Rejection 86 dB

ADC Conversion Resolution 16 bits

Hardware Filter 2nd order RC

External Power Supply 20-28 VDC

Nominal Supply Voltage 24 VDC

Current drawn from BIU power supply 251 mA, maximum

Ground to Logic Isolation 1500 VAC for 1 minute; 250 VAC, continuous

Input Grouping Single group

Loop wiring ANSI Type 2 2-wire transmitter; ANSI Type 3 2-wire transmitter;

Date 12/16/2022

Weight: 0.270

Measurements 6x9x10

Locator: GP04CL46P4              

Cabo Eletro Comercial ltda thanks you

IH

5 reasons to be our customer:

	Exceptional Support - Our friendly support team is available around the clock to help customers with any questions or concerns. We want our products to provide maximum joy and value without complications. That's why we insist on being available to help when
	Agile and Affordable Shipping - We have partnerships with the best shipping companies in the country and worldwide. We ship orders all over the world.
	Accurate Item Description - As we sell items from different states, we always strive to be as precise as possible in our item descriptions so that the customer knows exactly the quality of the item they are purchasing.
	Unbeatable Price - Cabo Eletro's main policy is to have the lowest price in the market. Our product catalog is constantly updated so that our prices are the lowest worldwide.
	Easy, Fast, and Secure Ordering - Orders placed in our store are 100% secure as they are processed by the best existing payment tools.